This is an for up to 5 Brand New in the Box, Pacific Linear 30MM ID X 47MM OD x 68MM Long Bearings, No. FM30.

Each Bid is Bearing.

PACIFIC BEARING FM30 Standard Linear Bearing Closed Bore Dia 30 mm Inside Dia Tolerance +/- .001 Outside Dia 47 mm Outside Dia Tolerance +/- .001 Between Grooves 48 mm Length 68 mm Static Load Capacity 4284 Lb Max Pv 20 000 Temp Range 0 - 400 F Anodized Aluminum Material For Use With Linear Motion Shafts

The Pacific Linear Bearings are made from 6061-T6 and is heat treated and artificially aged aluminum with good strength and corrosion resistance and Anodized with a sulfuric bath anodizing with a nickel acetate seal that will stand up to 14 days exposure in a 5% salt spray solution at 96°F.

All bearings are precision ground both I.D. and O.D. to provide the highest quality.

These bearings can carry from 4 to 20 times the load of a linear ball bearing.

STRENGTHS:

Embeddability of hard particulate eliminating seals in most applications

High load capacity

Self-lubricating - runs with or without added lubrication will also allow the frictional heat to dissipate through the bearing shell

Will not rust or corrode due to the anodized aluminum shell

Highly accurate - all critical OD and ID surfaces are precision ground on bearing grinders.

The liner is bonded to the bearing shell at the molecular level transferring the load throughout the bearing

Smooth running, vibration dampening, no metal-to-metal contact or shaft galling

WILL NOT CATASTROPHICALLY FAIL

bearings stand up to harsh and dirty environments i.e. grease, saw dust.

bearings will provide excellent performance in a submerged condition. The bearings will employ the fluid as a lubricant showing increased velocities and wear life. Oils and non-salt water are especially effective.

Due to self-lubrication, low outgassing, and a minimum of particulate (buildup), Simplicity bearings are excellent in clean rooms and vacuums.

I will fully guarantee this bearing.

Shipping in the Continental US is $4.90 - I have very competitive rates for our always welcomed International bidders.

Thanks for looking! If you have any question on this item please call us at 1-800-826-3433 (9 - 5pm Eastern).